Custom Search
|
||||
Home | Articles | Pool Tips | Supplies | Books | Search | ||||
|
ARTICLE CATEGORIES
|
Articles on Salt Chlorine Generators
|
The Chlorinator Display Has Changed
If the chlorinator display has changed, it may be showing in metric units rather than English units. To toggle between metric and English, push the small button next to the display until the temperature is displayed. Then change the main switch from AUTO to SUPER CHLORINATE and back to AUTO.
The Pool Water is Clear but there is No Chlorine Reading
Test and adjust all chemicals as recommended in the owner's manual.
Make sure the chlorine stabilizer (cyanuric acid) is in the range of 30 – 80 ppm.
Make sure the filter is running long enough to produce the required amount of chlorine. Try increasing the filter cycle time.
If an algaecide was recently used, superchlorinate using the Aqua Rite chlorinator following the instructions in the owner's manual.
Green Pool Water and No Chlorine Reading
Clean the Main Filter
Test and adjust all chemicals to the recommended levels.
Make sure the chlorine stabilizer (cyanuric acid) is in the range of 60 – 80 ppm.
Make sure the filter is running long enough to produce the required amount of chlorine. Try increasing the filter cycle time.
Superchlorinate the pool using the Aqua Rite chlorinator following the instructions in the owner's manual.
Strong Chlorine Odor
A strong chlorine odor indicates there is a high amount of chloramines (used chlorine) in the swimming pool. Test and adjust all chemicals in the pool and then superchlorinate using the Aqua Rite chlorinator following the instructions carefully.
Eye and Skin Irritation
Eye and skin irritation usually indicates an improper pH level. Test and adjust the pH to 7.2 – 7.6 as recommended in the owner's manual.
Slimy Feeling on the Pool Walls or Pool Cleaner
A slimy feeling on the pool walls or pool cleaner is an indicator of early algae growth. Brush the pool and immediately superchlorinate using the Aqua Rite chlorinator following the instructions in the owner's manual.
Make sure the filter is running long enough to produce the required amount of chlorine. Try increasing the filter cycle time.
Search Supplies and Products:Custom Search |
Search Articles and Tips:Custom Search
|
|
Home Articles Pool Tips Supplies Books Search Sitemap Partners |